Demmerg

DEMCO EPOX 283 DBA

Description

DEMCO EPOX 283 DBA is an epoxy based, two component, adhesive and assembly mortar. In all kinds of iron ore planting, placement of anchorage elements; in concrete crack repair and insulation, crack injection, crack insulation; in all kinds of structural concrete repairs; It is used in the assembly and bonding of all kinds of metal parts to concrete or steel parts and as a dilatation tape adhesive

Advantages

  • Solvent free.
  • Does not contain solvent.
  • It is easy to use and apply.
  • Its mechanical strength is high.
  • It is waterproof.
  • It can adhere even on moist surfaces.
  • Adheres perfectly to concrete and steel.
  • It does not shrink.
  • It adapts to the ground tensions arising from temperature differences and is not affected.
  • Since there is no need to apply adhesive mortar on the back surface of the plates, the application speed increases.
  • It is resistant to freeze-thaw cycle.
  • It does not flow on vertical surfaces due to its thixotropic feature.

Technical Properties

Number of Components 2
Mixing Ratio (by weight) A/B (75/25)
Mixing Density (g/cm3 (TS EN ISO 2811-1) 1,75 ± 0,10
Pot Life ( min., 23°C, 100 ml ) (DIN 16945) 50-90
Mixing Viscosity (mPas, 25°C) (EN ISO 3219) 200 – 350
Curing Time ( 23°C ) ( TS 4317 ) –
Dry to Touch (Hours) 5 – 7
Fully Cured (Week) 1
Floor Admission –

Storage and Shelf Life

It should be kept in its original, unopened package and in closed and dry places, which are at 15 – 25°C. It must not stay under direct sunlight. Under these conditions, the shelf life is 12 months.

Package

It is in 5 and 25 kg containers.

Documents