DEMCO EPOX 2100 SELF/ESD
Description
DEMCO EPOX 2100 SELF/ESD is an epoxy-based antistatic floor coating material that does not contain solvent, can be spread by itself, has high mechanical and chemical resistance. It is used in the coating of floors where high mechanical strength and antistatic (semi-conductivity) is required, in laboratories related to the health sector, especially in the production of electrical and electronic parts and in test laboratories.Advantages
- Has resistance to abrasion and friction.
- Does not dust and easy to apply.
- Hygienic. Easy to clean.
- Provides of transferring static electricity to the bottom layer by conductors.
Technical Properties
| Number of Components | 3 |
| Mixing Ratio (by weight) | A/B (80/20) |
| Mixing Density (g/cm3 (TS EN ISO 2811-1) | 1,50 ± 0,10 |
| Pot Life ( min., 23°C, 100 ml )(DIN 16945) | 50-90 |
| Mixing Viscosity (mPas, 25°C) (EN ISO 3219) | 200 – 350 |
| Curing Time ( 23°C ) ( TS 4317 ) | – |
| Dry to Touch (Hours) | 8 – 10 |
| Fully Cured (Week) | 1 |
| Electrical Conductivity Value (100 V) (DIN EN 61340-4-1) | 750 kΩ – 35 MΩ |
Storage and Shelf Life
It should be kept in its original, unopened package and in closed and dry places, which are at 15 – 25°C. It must not stay under direct sunlight. Under these conditions, the shelf life is 12 months.Package
Total : 20 kg (A: 16,00 kg / B: 4,00 kg)CONDUCTIVITY MEASUREMENT CERTIFIED
Documents
 |
DEMCO EPOX 2100 SELF/ESD | Data Sheet |