DEMCO ® EPOX 2160 TİX ESD

Description

Solvent-free, epoxy-based, antistatic (Semi conductive), textured (non-slip) surface flooring material. Used for flooring applicaitons where high mechanical strength, slip resistance, and antistatic properties are required. It is especially used in laboratories relates to the healthcare sector and in areas where electrical and electronic components are manufactured.

---

Advantages

•  Resistant to abrasion and wear.
• Transfer static electricity on the surface to the conductors beneath, ensuring grounding.
• Seamless surface, easy to clean, hygienic, and requires low maintenance.
• Provides a non-slip surface to its textured finish.

---

Technical Properties

Number of components	2
Mixing Ratio (By weight)	A/B (85/15)
Mixture Density (g/cm³, 20°C) (TS EN ISO 2811-1)	1,7 ± 0,10
Pot life (min., 23°C, 100 ml) (DIN 16945)	50-90
Electrical conductivity* (100 V) (DIN EN 61340-4-1)	106 Ω – 109 Ω
Drying time at (23°C sa.) (TS 4317)	24
Touch Dry Time (Hours)	8-10
Full Cure (Week)	1

*These values may vary depending on environmental conditions (temperature and humidity) and the equipment used for measurements   Mechanical Properties

Shore D Hardness (ASTM D 2240)	> 70
Abrasion Resistance (mg) Taber,CS17,1kg 100 cycles ) (ASTM D 4060)	<100

Package

Total Net weight: 20 kg (A: 17,00 kg  /B: 3,00 kg)

---

Documents